telco丹麦 PA 11光电放大器

telco丹麦 PA 11光电放大器
性能描述：
操作模式和较大的感应距离：
       对射：0-70m
       漫反射：0-5m
输入电源：230V 交流，115V交流或24V直流
人工调节灵敏度。
传感器指示灯驱动。
自动传感器测试。
调节开/关延迟时间。
1继电器和/或1晶体管输出。
可选亮态/暗态操作。
可选长/短范围。
电源，输出和信号水平指示灯显示。
11较DIN插座连接。?
PA11是一个信道的光电放大器，用来连接一套来自100，110或120系列远距离发射器LT和接收器LR。通过放大器前面板上的集成电位计可人工调节灵敏度。可选继电器输出或NPN或NPN和PNP晶体管输出，0-10秒开/关延迟时间。可选亮态/暗态操作和长/短范围。
　　内置微处理器，自动检测发射器和接收器的电缆或电子元器件的故障，并通过面板相关的指示灯显示。可选远距离传感器输出（LT）和电源（LR）指示灯显示驱动电源。
 
Technical Data
Supply voltage
24 V dc, 24 V ac, 115 V ac or 230 V ac
Voltage tolerance
+/– 15 ％
Current consumption
Max. 3,5 VA
Relay
Output
Transistor
1 open / 1 close, 250 V ac / 3 A, 120 V ac / 5 A
60 mA / 30 V dc
Power on indicator
Green LED
Output indicator
Yellow LED
Signal level indicator
Green LED
LR sensor failure indicator
Red LED
LT sensor failure indicator
Red LED
 
Sensor monitor LED drive
The green monitor LED on the receiver indicates ‘Power ON’
The yellow monitor LED on the transmitter indicates ‘PA 11 output activated’
Hysteresis
Approx. 45 ％
Relay
Operation frequency
Transistor
14 Hz
20 Hz
Relay
Response time tON / tOFF
Transistor
35 ms / 35 ms
25 ms / 25 ms
Delay tON / tOFF                            PA 11 A
0 – 10 sec, adjustable
Housing material
Noryl

Environmental Data
Temperature, operation
–10 to +50 oC
Temperature, storage
– 40 to +80 oC
Sealing class
IP 40
Approvals
a


Available Types
 
Model
 
Connection
Supply Voltage
24 V dc
24 V ac
115 V ac
230 V ac
Output
Order Reference
PA 11 A On/Off delay
 
 
11-pole DIN socket
Relay and NPN
PA 11 A 303T
PA 11 A 302T
PA 11 A 301T
PA 11 A 300T
NPN and PNP
PA 11 A 403T
PA 11 A 402T
PA 11 A 401T
PA 11 A 400T
 
PA 11 B
Relay and NPN
PA 11 B 303T
PA 11 B 302T
PA 11 B 301T
PA 11 B 300T
NPN and PNP
PA 11 B 403T
PA 11 B 402T
PA 11 B 401T
PA 11 B 400T


Applicable Remote Sensors and Ranges
Series
Thru Beam
Diffuse Proximity
100
18 m
1,1 m
110
40 m
2 m
120
70 m
5 m
?